Machine Used

Sunnen vertical Power-Stroke Cylinder Hone Model CV-616 in good condition, ready to work, versatile diameter range 19-203 mm and can handle lengths up to 405 mm, depending on diameter. It is particularly suitable for honing engine blocks, including V-blocks, overhead, L-head in line and angle head blocks. Can handle workpieces up 1067 mm. Machines is equipped with honing mandrels and stones as photos (4HP28-2500, AN600 and others)

Minimum. Max Honing dia. 19-203 mm
Strokes Pr. min 41 - 57 -80 Max.
Honing length 150 mm Max.
Workpiece L 1168 x W 558 x H 673 mm mm
Max. Workpiece load 680 kg
Spindle speeds 125 - 170 - 230 - 310 rpm
Total motor power 2.62 kW
Electrical requirements : 380 V, 3 Ph
Length 1835 mm, Height: 2200 mm, Width: 1400 mm
Weiht: 1050 KG

Location: Cantù (CO) – Italy. The machine can be viewed.

WARRANTY: Seller makes no warranties of any kind whatever, expressed, or implied. All specifications and descriptions of said goods are approximate, not binding and meant only as a guide. It is the Buyer’s responsibility to inspect the goods and ascertain if the specifications, description and condition of the goods confirm to the Buyer’s requirement.

SALES CONDITION: Buyer is responsible for scheduling transportation of this machine, as well as all cost to move it. If you need help with scheduling, please contact us and we will assist you.

All goods remains the property of Superabrasivi until full payment of the amount due

We can supply all kind of honing tools for special price.

For any questions contact us: info@superabrasivi.it

Sunnen Used honing Machine MBC 1804H in very good condition, suitable for holes from 1,5 mm up to 165mm

Location: Cantù (CO) – Italy. The machine can be viewed.

WARRANTY: Seller makes no warranties of any kind whatever, expressed, or implied. All specifications and descriptions of said goods are approximate, not binding and meant only as a guide. It is the Buyer’s responsibility to inspect the goods and ascertain if the specifications, description and condition of the goods confirm to the Buyer’s requirement.

SALES CONDITION: Buyer is responsible for scheduling transportation of this machine, as well as all cost to move it. If you need help with scheduling, please contact us and we will assist you.

All goods remains the property of Superabrasivi until full payment of the amount due

We can supply all kind of honing tools for special price.

For any questions contact us: info@superabrasivi.it

Sunnen Used basic honing Machine MBB 1660 in very good condition with Sunnen cabinet full of honing tools for a small diameter (from 2 mm-12 mm), easy to use, ready to work, suitable for holes from 1,5 mm up to 165mm

Mini/maxi boring of honing:1,5/165 [mm]
Length Range: Homes bores up 400mm length, depending on bore diameter
Spindle Speeds:200,250,320,400,500,640,800,1000,1270,1600,200,2500 rpm
Spindle Motor:1/2 HP (0,375 KW)
Honing oil Pump: Utilizes spindle drive motor
Honing Oil Capacity: 60 L
Electrical requirements : 220V, 1Ph
Floor Spaces: 762 mm wide, 1524 mm deep, 1600 mm high
Weight: 287 kg

Dimension of Sunnen Cabinet:
1701 mm (67") Height
889 mm (35") Width
610 mm (24") Depth
Weight: 135 kg

Location: Cantù (CO) – Italy. The machine can be viewed.

WARRANTY: Seller makes no warranties of any kind whatever, expressed, or implied. All specifications and descriptions of said goods are approximate, not binding and meant only as a guide. It is the Buyer’s responsibility to inspect the goods and ascertain if the specifications, description and condition of the goods confirm to the Buyer’s requirement.

SALES CONDITION: Buyer is responsible for scheduling transportation of this machine, as well as all cost to move it. If you need help with scheduling, please contact us and we will assist you.

All goods remains the property of Superabrasivi until full payment of the amount due

We can supply all kind of honing tools for special price.

For any questions contact us: info@superabrasivi.it

Sunnen Used honing Machine MBC 1802D in very good condition suitable for holes from 1.5 mm up to 165 mm

Automatic Sizing I.D. Range: 3.18mm to 51mm
Power Stroking I.d. Range 1.5mm to 95 mm
Manual Stroking I.d. 1.5 to 165mm
Min/Max. manual honing boring : 1,5 / 165 [mm]
Max. blind honing length : 254 [mm]
Max. opening honing length : 406 [mm]
Rotation speed : 200 - 2500 [Rpm]
Transposition speed : 80 - 310 [bpm]
Floor dimensions : 1250 x 1830 [mm]
Height : 1700 [mm]
Weight : 530 [kg]

Location: Cantù (CO) – Italy. The machine can be viewed.

WARRANTY: Seller makes no warranties of any kind whatever, expressed, or implied. All specifications and descriptions of said goods are approximate, not binding and meant only as a guide. It is the Buyer’s responsibility to inspect the goods and ascertain if the specifications, description and condition of the goods confirm to the Buyer’s requirement.

SALES CONDITION: Buyer is responsible for scheduling transportation of this machine, as well as all cost to move it. If you need help with scheduling, please contact us and we will assist you.

All goods remains the property of Superabrasivi until full payment of the amount due

We can supply all kind of honing tools for special price.

For any questions contact us: info@superabrasivi.it