used grinding honing machines/machine tools high quality top service

Click image for a larger version

Barnes International (USA)Model:
224Capacity:
25 -150mm diameter x600mm longDescription:
Basic vertical used honing machine fitted with hydraulic stone expansion. Price:
Make us an offer -it has to go!Terms:
Pro-Forma, (+VAT for UK sales). FCA = loaded on transport, ex-works Cheltenham Tooling:
Let us know what you need Training available from £350/dayEmail:
enquire about this machine

Click image for a larger version

Barnes International (USA)Model:
Number 3Capacity:
Tubes 10 -300mm diameter, up to 4000mm longDescription:
We have three of these extremely popular rugged second hand horizontal honing machines in stock that range in stroke-length (from 3.0 to 4.0m), age and condition (from virtually unused to fully commissioned). Ideally suited for tubes between 25 -150mm diameter, they can be adapted to hone down to 10mm and up to 300mm diameter.Price:
POATerms:
Pro-forma (+VAT for UK sales) FCA =Loaded on transport, ex-works CheltenhamTooling:
Negotiable Training available from £350/dayEmail:
enquire about this machine

Click image for a larger version

Delapena Honing Equipment (UK)Model:
Bench HoneCapacity:
1.14 -80.00mmDescription:
We've acquired the last four Bench-Hones ever made, direct from Delapena, after they discontinued the model in 2008. These are all BRAND NEW single-phase machines and are still in their factory wrapping. Complete with oil pump and simple drip tray, the machines are an ideal introductory hone for the first time user. We've now sold two of these, so there are only two left. Price:
£1,470Terms:
Pro-Forma, (+VAT for UK sales). FCA = loaded on transport, ex-works Cheltenham Tooling:
Brand new tooling & consumables available at cost. Training offered from £350/day. Email:
enquire about this machine

Click image for a larger version

Delapena Honing Equipment (UK)Model:
HHM1ACapacity:
1.5 -80.0mm diameter Description:
The HHM1A is a basic hand-honing machine, and was the forerunner to Delapena's popular 'Speedhone'. With new tooling you can achieve the same tolerances and surface finishes as on a brand new machine, and is ideal for the occasional user. We've currently got two of these reliable starter machines in stock, both in fine working order. Price:
£600Terms:
Pro-forma (+VAT for UK sales) FCA =loaded on transport, ex-works Cheltenham Tooling:
Brand new tooling & consumables available at cost. Training offered from £350/day. Email:
enquire about this machine

Click image for a larger version

Delapena Honing Equipment (UK)Model:
AutospeedhoneCapacity:
1.50 -80.00mmDescription:
Delapena's Autospeedhone is suitable for automatically honing medium and large batches of components. Regular visitors to this site will know that for some time we've have four Autospeedhones in stock, which is more than we really need. Well we've now got five, so make us an offer and pick up a bargin. Price:
Offers around £1,750Terms:
Pro-Forma, (+VAT for UK sales). FCA = loaded on transport, ex-works Cheltenham Tooling:
Brand new tooling & consumables available at cost. Training offered from £350/day.Email:
enquire about this machine

Click image for a larger version

Delapena Honing Equipment (UK)Model:
Autospeedhone SCapacity:
1.143-79.375mm diameter, Description:
The Autospeedhone S was introduced in 1988 and is the penultimate incarnation of the popular Speedhone machine, being superseeded only by the current model the Speedhone EA in 1992.The S model has a longer workpiece bed and stepless drives. We have two second hand hones in stock, both in very good condition, and suitable for production honing medium and large batches of components. Price:
£2,280Terms:
Pro-forma, FCA (loaded on your transport, ex-works Cheltenham)Tooling:
New and used tooling available at extra costEmail:
enquire about this machine

Click image for a larger version

Delapena Honing Equipment (UK)Model:
Speedhone EACapacity:
1.14 -80.0mm diameter x350mm long strokeDescription:
The Speedhone EA replaced the popular Autospeedhone S in 1992 and is an efficient, productive and quick to set up horizontal honing machine with electronic spindle control. We have acquired 4 of these used honing machines direct from the factory, they have spent their entire life to date in Delapena's contract honing department and are offered with a factory backed 6-months parts warranty. Price:
£10,500Terms:
6-months parts warranty Pro-Forma, (+VAT for UK sales). FCA = loaded on transport, ex-works Cheltenham Tooling:
Brand new tooling & consumables available at cost. Training offered from £350/day. Email:
enquire about this machine

Click image for a larger version

Delapena Honing Equipment (UK)Model:
SmarthoneCapacity:
1.50 -80.0mm diameterDescription:
The Smarthone is a Speedhone EA fitted with a vibratory pick and place fixture, autosizing control and a terrible paint job that allows the machine to run automatically, unattended for hour after hour. Designed for volume manufacture, the preowned honing machine will need to be re-jigged and then set for a new job, and we can help and advise on this if requiredPrice:
TBATerms:
Pro-forma,(+VAT for UK sales) FCA =loaded on transport, ex-works CheltenhamTooling:
TBAEmail:
enquire about this machine

Click image for a larger version

Delapena Honing Equipment (UK)Model:
E 2000Capacity:
3.00 -120.0mm diameter, x300mm strokeDescription:
The E2000 is a powerful, versatile machine that is capable of achieving sub-micron tolerances. It utilises a fully programmable electronic management system, which allows the user to input, store, monitor and control all necessary machine and tooling parameters, including short-stroke. Multi-stage hone expansion allows the machine to rough and finish using a single set up. Ideal for large batches and production honing. Price:
£16,700Terms:
Pro-Forma, (+VAT for UK sales). FCA = loaded on transport, ex-works Cheltenham Tooling:
Brand new tooling & consumables available at cost. Training offered from £350/day. Email:
enquire about this machine

Click image for a larger version

Delapena Honing Equipment (UK)Model:
BeamstrokerCapacity:
25.4 -368.0mm diameterDescription:
Delapena's popular 'nodding donkey' second hand honing machine is capable of honing parts from 1" to 14.5" diameter and uses inexpensive tooling to achieve it's great size range. Just as happy removing a couple of thou of corrosion from a single component as it is producing production batches. Price:
£2,500Terms:
Pro-Forma, (+VAT for UK sales). FCA = loaded on transport, ex-works Cheltenham Tooling:
Brand new tooling & consumables available at cost. Training offered from £350/day. Email:
enquire about this machine

Click image for a larger version

Delapena Honing Equipment (UK)Model:
AutostrokerCapacity:
25.4 -368.00mm diameterDescription:
We now have two used Autostroker honing machines available, based on the popular Beamstroker the Autostroker adds two pneumatic cylinders to take the manual work out of stroking the machine up and down. The power unit gives controlled stroking speeds throughout its range and allows for short stroke and dwell during the auto cycle.Price:
from £3,750Terms:
Pro-forma, (+VAT for UK sales) FCA =loaded on transport, ex-works CheltenhamTooling:
New or used tooling available, training offered from £350/day.Email:
enquire about this machine

Click image for a larger version

Delapena Honing Equipment (UK)Model:
PowerhoneCapacity:
35.4 -368.00mm diameter, x800mm stroke Description:
The Powerhone is the replacement for the popular Auto-Beamstroker, and it combines hydraulic stroking power with precise control. The machine has short stroke and dwell facilities along with a self-contained honing oil tank and pump unit. The Powerhone is one of Delapena's best selling models, but is very seldom found on the second-hand market. This is only the second used Powerhone machine we've had, and is sure to sell soon.Price:
£9,800Terms:
Pro-Forma, (+VAT for UK sales). FCA = loaded on transport, ex-works Cheltenham Tooling:
Brand new tooling & consumables available at cost. Training offered from £350/day. Email:
enquire about this machine

Click image for a larger version

Delapena Honing Equipment (UK)Model:
VHM/3Capacity:
25.0 -150.0mm diameter, x760mm stroke lengthDescription:
The VHM/3 is a powerful semi-automatic machine fitted with rugged hydraulic stroking. We have only one of a batch of two of these used honing machines left. They are ideal for honing cylinder blocks, liners, hydraulic cylinders and the like. They use Delapena’s popular friction feed expansion system and low cost toolingPrice:
£7,500Terms:
Pro-forma (+VAT for UK sales) FCA =loaded on transport, ex-works Cheltenham Tooling:
Brand new tooling & consumables available at cost. Training offered from £350/day. Email:
enquire about this machine

Click image for a larger version

Delapena Honing Equipment (UK)Model:
VHM 3E 66Capacity:
40 -300mm diameter up to 1500mm longDescription:
We have two of these powerful vertical honing machines in stock. Equipped with hydraulic 'push' expansion they are capable of very rapid stock removal and are ideal for honing hydraulic cylinders and chunky machined components. Made in the 1960's these machines have straightforward hydraulic and electrical circuits, which makes them very simple to service and easy to use and operate.Price:
Offers based on £14,750, depending on tooling requiredTerms:
Pro-forma (+VAT for UK sales) FCA =loaded on transport, ex-works CheltenhamTooling:
As required Training offered from £350/day.Email:
enquire about this machine

Click image for a larger version

Delapena Honing Equipment (UK)Model:
E3000Capacity:
3.0 –80.0mm diameter x 300mm stroke Description:
The E3000 is a simple to operate but technically advanced NC controlled vertical hone. It utilises a fully programmable electronic management system, which allows the user to input, store, monitor and control all necessary machine and tooling parameters. Suitable for honing both one-offs and production batches to sub-micron tolerances this second hand honing machine is ideal for the volume user. Price:
£24,800Terms:
Pro-Forma, (+VAT for UK sales). FCA = loaded on transport, ex-works Cheltenham Tooling:
Brand new tooling & consumables available at cost. Training offered from £350/day. Email:
enquire about this machine

Click image for a larger version

Delapena Honing Equipment (UK)Model:
HHM30/20Capacity:
50 -460mm diameter x9145mm stroke Description:
A huge powerful proper used tube honer. Not to be confused with lightweight alternatives this is a full size production machine with 20hp motors, capable of ripping stock out of even the hardest of materials. Currently owned by our sister company Apperley Honing this machine has proved to be reliable, accurate and strong.Price:
£78,000 Terms:
Pro-forma FCA (loaded on your transport ex-works Cheltenham)+VAT for UK sales Tooling:
Tooling available by negotiationEmail:
enquire about this machine

Click image for a larger version

Nagel (Germany)Model:
VA2-120-SOCapacity:
50.0 -250.0mm diameter up to 1000mm longDescription:
A powerful 3kW hydraulic used vertical hone that takes no prisoners. It can run either Sunnen 'Portable' or Delapena 'Cylinder' tooling with a friction feed expansion unit. Great machine for one off and production honingPrice:
£4,800Terms:
Pro-Forma, (+VAT for UK sales). FCA = loaded on transport, ex-works Cheltenham Tooling:
Delapena or Sunnen tooling available at extra costEmail:
enquire about this machine

Click image for a larger version

Sunnen Products (USA)Model:
MBB1670-ACapacity:
1.5 -80.0mm diameter Description:
The Sunnen MBB 1670 (and its sister models the MBB 1650 & 1660) are workhorses of the hand-honing world. Very similar to Delapena'a Autospeedhone they are simple machines being very easy to set up and run. This used honing machine has the optional auto-stroking facility that makes it ideal for large batch work and serious production volumes Price:
£2,170Terms:
Pro-forma (+VAT for UK sales) FCA =loaded on transport, ex-works CheltenhamTooling:
Brand new tooling & consumables available at cost. Training offered from £350/day. Email:
enquire about this machine

Click image for a larger version

Sunnen Products (USA)Model:
MBB/MBC 1803 -1804Capacity:
1.50 -80.0mm diameterDescription:
Sunnen MBB-1800 series machines are semi-automatic machines that are suitable for running large batches of components. We have three preowned hones in stock, all in excellent condition Price:
from £3,600Terms:
Pro-forma (+VAT for UK sales) FCA =loaded on lorry, ex-works CheltenhamTooling:
Brand new tooling & consumables available at cost. Training offered from £350/day.Email:
enquire about this machine

Click image for a larger version

Sunnen Products (USA)Model:
EC-3500-CEMCapacity:
1.5 -100.0mm diameter, x170mm strokeDescription:
According to Sunnen's brochure, the EC-3500 machine takes power honing to a higher level of efficiency and performance, and they’re not wrong. Very much more powerful than the ‘traditional’ MBB1600/1800 series machines, the EC family are able to significantly reduce cycle times yet can still hold bore tolerance to within a few microns. This used honing machine is ideal for production of large batches of components. Price:
£18,800Terms:
Pro-Forma, (+VAT for UK sales). FCA = loaded on transport, ex-works Cheltenham Tooling:
Brand new tooling & consumables available at cost. Training offered from £350/day. Email:
enquire about this machine